Warm 2700–3000K, low‑glare profiles and soft‑start create comfortable night lighting. Add PIR/foot‑kick sensors.
Total meters ≈ bed side length × light runs per bed × no. of beds.
Driver sizing = (W/m × total meters) × 1.25 headroom. Use soft‑start and low‑level dimming for night mode.
Total meters ≈ bed side length × light runs per bed × no. of beds. Driver sizing ≈ (W/m × total meters) × 1.25 headroom.
| Voltage | W/m | lm/m | CRI | CCT | Cutting | Width | IP | Notes | Downloads |
|---|---|---|---|---|---|---|---|---|---|
| 24V | 6–8 | ~500–800 | ≥90 | 2700–3000K | 50 mm | 8 mm | IP20 | Night‑friendly main strip | Spectrum Report |
| 12V | 4.8–7.2 | ~400–700 | ≥90 | Warm white | 25/33 mm | 5/8 mm | IP20 | Sensor‑triggered path light | Datasheet |
Choose warm tones and low brightness for night use.
Download: Example spectrum report
Coverage depends on actual certified models and materials. Contact us for the certificate list per model.
Use warm CCT and dimming; set soft‑start below 30%.
Use concealed channels and pre‑labeled harnesses.
24V is cleaner for long runs; 12V OK for short/sensor zones.