16x16mm DMX TM512AC RGBW top view led neon strip DC24V
Description
Description
This neon strip is top view with a translucent silicone rubber as a diffuser.
It is designed to be bent up to down with light projecting upwards.
This silicone rubber is anti-UV, anti-aging, anti-yellowing, environmental protection, non-toxic,
and very soft.
Using highlight SMD5050 RGBW 4 in 1 LED chips, DMX IC, every 7LEDs & 1IC(4CH).
The color is rich, and a variety of color changing effects can be achieved through the controller.
Standard length is 5M/roll, length can be customized, there are cutting marks on the side.
IP65 waterproof for outdoor use.
Each roll includes 10pcs PC clips for installation (2pcs/m)
Share to
Specification
| PN | Ｎ016084CC4DC0 |
| SMD Type | SMD 5050 |
| LED Qty/M | 84LEDs/m |
| Pixel/M | 12Pixels/m |
| Voltage | DC24V |
| CCT | RGBW:3000K/4000K/6500K |
| Control | DMX/TM512AC |
| Luminance /M | R:315 G: 675 B:135 W:830lm |
| Dimension | (5025±15)*16*16mm |
| Material | Silicon |
| Power | 23W/m |
| Cutting unit | 83.33mm |
| O.T | -25℃ ~ 60℃ |
Remarks:
1. The above parameters are tested based on 1M standard products;
2. The luminous flux is allowed to have an error range of ±10%;
3. The above parameters are typical values;
4. The brightness with in 15M is consistent even if one end is powered;
5. Subject to change without prior notice;
6. Length tolerance applies. Actual product dimensions may vary.
Note: Length tolerance applies. Actual product dimensions may vary
