14Ｘ25mm Side view DMX RGBW led neon strip DC24V
Description
Description
This neon strip is side view with a translucent silicone rubber as a diffuser.
It is designed to be bent side to side with light projecting upwards.
This silicone rubber is anti-UV, anti-aging, anti-yellowing, environmental protection, non-toxic,
and very soft.
Using highlight 5050RGBW SMD LEDs, DMX IC, every 6LEDs & 1IC(4CH).
The color is rich, and a variety of color changing effects can be achieved through the controller.
Standard length is 5M/roll, length can be customized, there are cutting marks on the side.
IP65 waterproof for outdoor use.
Each roll includes 10pcs PC clips for installation (2pcs/m)
Share to
Specification
Product Parameter
| PN | Ｎ014060CC4DC0 |
| Voltage | DC24V |
| SMD Type | SMD5050 |
| LED Qty/m | 60LEDs/m |
| Pixel /M | 10sPixel/m |
| Color | RGBW:3000K/4000K/6500K |
| Control | DMX/TM512AC |
| Luminance/m | R:315 G: 675 B:135 W:830lm |
| Dimension | (5025±15)*14*25mm |
| Material | Silicon |
| Power | 19.2W/m |
| Cutting unit | 100mm |
| O.T | -25℃ ~ 60℃ |
Remarks:
1. The above parameters are tested based on 1M standard products;
2. The luminous flux is allowed to have an error range of ±10%;
3. The above parameters are typical values;
4. The brightness with in 15M is consistent even if one end is powered;
5. Subject to change without prior notice.
6. Length tolerance applies. Actual product dimensions may vary
Note: Length tolerance applies. Actual product dimensions may vary
Accessory
Set DMX address Video:
