10x20mm digital RGBW Side View LED Neon Flex DC12V
Description
Description
Silicone Neon LED flex made by extrusion, white color body, diffused color on thetop side.
Without light spot, Anti-UV and salt.
It's bendable within limited semi-diameter.
It's a 4 in 1 RGBW digital LED tape inside, each small section can be cut down refer to the black mark on the side of body.
The standard size is 5 meters, including 10pcs mounting clips.
Each roll with a pair of male/female connector.
Share to
Specification
Product Parameter
| PN | N010060CB4ST |
| Voltage | DC12V |
| LED Type | SMD5050RGBW |
| LED Quantity | 60LEDs/m |
| Luminance | R:70 G:121 B:27 W:215 |
| CCT | WW:2500-3000K / W:5000-5500K |
| Dimension | (5025±15)*10*20mm |
| Lumens/m | 1076lm |
| Cutting unit | 50mm |
| Power | 19.2W/m(Max) |
| Bending Direction | Vertically |
| O.T | -25℃ ~ 60℃ |
Remarks:
1. The above parameters are tested based on 1M standard products;
2. The luminous flux is allowed to have an error range of ±10%;
3. The above parameters are typical values;
4. The brightness with in 15M is consistent even if one end is powered;
5. Subject to change without prior notice.
6. Length tolerance applies. Actual product dimensions may vary
Accessory
Note: Length tolerance applies. Actual product dimensions may vary
