10*20mm RGBW Side View LED Neon strip DC12V/DC24V
Description
Description
Silicone Neon LED flex made by extrusion,white color body,diffused color on the top side
without light spot,it's bendable within limited semidiameter,Anti-UV and salt
it's a 4 in 1 RGBW LED tape inside ,no Pixel control,each small section can be cut down
the standard size is 5meters included 10pcs mounting clips
5Pin bare wire output from each side of the body
Share to
Specification
Product Parameter
| PN | N010060CB4PZ | N010060CC4PZ |
| Voltage | DC12V | DC24V |
| LED Type | SMD5050RGBW | SMD5050RGBW |
| LED Quantity | 60LEDs/m | 60LEDs/m |
| Luminance | R: 30 G: 120 B: 20 W: 180lm | R: 91 G: 155 B: 37 W: 322lm |
| CCT | WW:2500-3000K | W: 5000-5500K |
| Dimension | (5025±15)*10*20mm | (5025±15)*10*20mm |
| Lumens/m | 1076lm | 1076lm |
| Cutting unit | 50mm | 100mm |
| Power | 19.2W/m(MAX) | 19.2W/m(Max) |
| CRI | 85 RA | 85 RA |
| O.T | -25℃ ~ 60℃ | -25℃ ~ 60℃ |
Remarks:
1. The above parameters are tested based on 1M standard products;
2. The luminous flux is allowed to have an error range of ±10%;
3. The above parameters are typical values;
4. The brightness with in 15M is consistent even if one end is powered;
5. Subject to change without prior notice.
6. Length tolerance applies. Actual product dimensions may vary
Note: Length tolerance applies. Actual product dimensions may vary
