1764464137113582933.jpg

Kart Track Lighting Project | WS2811 SPI RGB Digital LED Strip 30LEDs/m (S010030CB3SF)

S010030CB3SF is a WS2811 (SPI) addressable RGB digital LED strip featuring 30pcs SMD5050 RGB LEDs per meter with 10 pixels/m. It is cuttable every 100mm (3 LEDs/section) for easy length matching. Standard packing is 5m/reel with 3M tape included, JST SM connectors on each side, and multiple waterproof processes such as silicone coating, silicone tube housing, or silicone injection (IP20/IP64/IP65/IP67). 

POWER

6W/m

BRIGHTNESS

Luminous flux per meter (typical per RGB channel): R 59 lm / G 141 lm / B 32 lm

WEBSITE

10mm (strip width; FPC thickness shown ~0.22mm)

Description

The project page shows a client’s kart track installation using WS2811 30LEDs/m strips to create attractive animated ambience along the track. The page also mentions DC24V and long roll lengths (20m/30m) used in the project—this reflects typical engineering customization. For large-scale or long-run installations, iPixel can customize voltage and roll length (plus IP rating, cables/connectors) to reduce joints, speed up installation, and improve overall project delivery efficiency. 

This is an indoor kart racing track. The customer designed our soft light strips into 20-meter sections, each installed inside a 360-degree luminous tube. The key issues addressed are that the voltage drop is minimal, allowing a 20-meter strip to be powered from a single point. Additionally, the LED light strips we provide are UL-certified.

9a.jpg