12V Addressable RGB LED Strip 60LEDs/m | Dual-Signal Breakpoint Resume | WS2815/HC2815

Germany Stage Decoration – 12V Dual-Signal Addressable RGB LED Strip 60LEDs/m (S010060CB3SB7)

S010060CB3SB7 is a 12V dual-signal addressable RGB LED strip featuring 60pcs/m SMD5050 RGB LEDs and WS2815/HC2815 pixel control. With dual-signal transmission and breakpoint resume, the strip continues working even when a single LED is damaged or physically removed. It is cuttable every LED (16.66mm), built on a 10mm white/black PCB, supplied in 5m reels, and available with IP20/IP64/IP65 protection options.

POWER

9W/m (DC12V)

LUMINOUS EFFICACY

Approx. 26 lm/W (reference value based on total RGB lumens ~235 lm/m at 9W/m; varies by color mixing and control settings)

BRIGHTNESS

R: 40 lm/m; G: 157 lm/m; B: 38 lm/m (IP20, tested per 1 meter)

WEBSITE

FPC approx. 0.22mm (excluding waterproof layers); PCB width 10mm

Description

S010060CB3SB7 is designed for stage decoration, retail ambience and linear pixel lighting effects. Using SMD5050 RGB LEDs at 60 pixels per meter, it enables chasing, flowing, gradient and segmented color effects via WS2815/HC2815 control systems.

Dual-signal data + breakpoint resume: redundancy design keeps downstream pixels operating even if a single LED fails or is removed, improving installation reliability.
DC12V input: reduced voltage drop compared with 5V pixel strips, suitable for medium-length runs.
Fine cutting: cuttable every LED (approx. 16.66mm), easy to fit exact structure lengths.
Mechanical & wiring: 10mm white/black PCB, 120° beam angle, standard 4-pin JST-SM connector; IP options IP20 / IP64 / IP65.
Typical specs (IP20): 9W/m; wavelengths R 615–630nm / G 520–535nm / B 450–460nm; operating temp -25~60°C.
Customization is available for length, cable/connector, and IP protection process, plus matching controller & power supply recommendations.

Projects