WHERE_IT_APPLIES_EN｜Where It Applies

- Retail shelves, gondolas, end-caps, display fixtures, showcase cabinets (non-refrigerated)

- Indoor commercial environments; high hours/day operation; frequent merchandising changes

- Lighting positions: shelf front, underside, vertical uprights, canopy, sign illumination

- Power: 24V/48V DC; daisy-chain or harness-based installation

- Controls: on/off, DALI/0–10V via driver, occupancy/sensor control (as required)

- Not a fit for outdoor exposure unless IP/UV requirements are specified and validated

CAPABILITY_SNAPSHOT

- Goal: fast installation with uniform brightness, low glare, and consistent color across multiple shelves.

- Risks addressed: voltage drop on long runs, inconsistent color bins, poor mounting reliability, field maintenance issues.

- Deliverables: standardized light + harness kit, install guide, QC/traceability controls for repeatable rollouts.

INPUTS_WE_NEED

- Fixture layout (shelf lengths, quantity, wiring route, driver location)

- Target lighting effect (dotless, hotspot-free, beam direction, glare limits)

- Brightness target and uniformity tolerance; CCT/CRI; SDCM target if needed

- Power & control (24/48V; dimming method; sensor requirements)

- Mounting method preference (adhesive, clips, aluminum profile, magnetic)

- Serviceability expectations (replaceable modules vs permanent)

- Compliance/document requirements and sample/rollout schedule

PROBLEMS_WE_SOLVE

- Brightness drop at far end due to long runs and insufficient power planning

- Glare/hotspots visible to customers; inconsistent appearance between shelves

- Color mismatch between shelves/batches causing uneven merchandising

- Install time too long; too many custom wires/connectors in the field

- Adhesive failures on powder-coated metal or textured surfaces

- Maintenance difficulty and inconsistent field repairs

KEY_ENGINEERING_CONTROLS

- **Uniformity planning:** voltage-drop budgeting; define max run length; injection strategy; verify worst-case shelves

- **Optics & glare:** diffuser/profile selection; shielding line-of-sight; consistent aiming angles

- **Color control:** lock CCT/CRI/SDCM targets; incoming bin control; batch sampling and record keeping

- **Fast install harness:** standard lengths, keyed connectors, clear pinout; strain relief; labeling for installers

- **Mounting reliability:** surface prep guidance; adhesive selection; clip/profile options for replaceable modules

- **Rollout QA:** CTQ checkpoints and traceability; change control for revisions

VALIDATION_TESTING

- Uniformity at max run | Condition: worst-case shelf length | Pass: brightness drop within agreed tolerance

- Appearance / glare check | Condition: typical viewing angles | Pass: no unacceptable hotspots/glare

- Connector temperature rise | Condition: max current | Pass: within safe temperature rise target

- Adhesion test | Condition: surface + aging | Pass: no delamination under agreed conditions

- Color consistency | Condition: batch sampling | Pass: within agreed CCT/SDCM tolerance

COMPLIANCE_DOCUMENTATION

Compliance support (as applicable):

- CE / RoHS / REACH

- UL/ETL support if requested (confirm model scope)

Documents pack typically includes:

- Product specification sheet (electrical/optical/mechanical)

- Wiring diagram + harness drawing + pinout

- Harness BOM (wire gauge, connector type, lengths)

- Installation guide (mounting + cleaning guidance)

- Validation / test plan + test summary (project-based)

- Incoming inspection checklist + in-process QC checklist

- Traceability: lot marking + basic production records

- Change control: ECN/PCN record for revisions

- Packing and labeling requirements (if provided by customer)

PROVEN_IN_PROJECTS

Use your Project Library (Project as a top-level menu) to avoid duplication.

- Add 2–5 clickable project links under this industry: Project > Retail Shelving & Display Fixtures (Illuminated Displays)

- Suggested evidence card format (keep it short):

- Application: ____ | Highlights: ____ | Verified by: ____

RELATED_INDUSTRIES_PRODUCTS

Related industries:

- Cabinet & Furniture Lighting

- Commercial Refrigeration

- Arcade & Gaming Machines

FAQ

Q: How do you ensure fast installation across many store locations?

- We standardize harness kits, connector keying, labeling, and provide a clear installation guide and QC checklist.

Q: Can you provide dotless, glare-controlled shelf lighting?

- Yes. We use diffused/COB options and validate appearance from typical customer viewing angles.

Q: How do you keep color consistent across large rollouts?

- We lock CCT/SDCM targets, control incoming bins, and perform batch sampling with traceability.

Q: How do you handle very long shelf runs?

- We apply voltage-drop budgeting and injection planning, and validate uniformity at worst-case lengths.