Before we just have 1m DMX led tube,so only can do 1m ,2m length, here attached our standard product link:http://www.ipixelleds.com/index.php?id=144 now we only change the length ,it is DC12V 24leds with 8 pixels, so we can do 0.5m,1.5m even 2.5 m. welcome to share us your great idea!
READ MORE →This is a new custom product from one of our client. they did the single color Cree high power rigid PCB before, and now they ask to do RGB one. We used 3535 high power LED chip, each PCB has 12LEDs/pcs, 28W, DC24V. Each LED chip with a lens,the light beam 10x45 degree,PCB width is 760*24*14mm, there has 4pcs*5mm diameter holes for you to installation, both end with 2pcs*2 hole wago connector. Just in case your have any new ideas, feel free to contact us.
READ MORE →3535 high power Cree LED chip, each PCB has 12LEDs/pcs, 28W, DC24V. Each LED chip with a lens; Beam Angle:10x45 degree; PCB size :760*24*14mm; Mounting holes:4pcs*5mm diameter.
READ MORE →LED Quantity: 60LEDs/m Voltage: DC12V, LED color: White LED chip : SMD 2835 PCB width: 8mm Non-waterproof IP20, 2pin male/female connector The led strip has two positive terminal at one end and two negative terminal at the other Welcome to contact us If you have good new ideas.
READ MORE →This is a new custom product from one of our client,they done 10led/pcs with Molex connectors (2.54 pixel pitch) before,but now they ask to do 12led per pcs. This one we use APA102 led chip,not SK9822,and the size is 435*14mm, there has 4pcs*5mm diameter holes for you to install that,both end with 2pcs*4pin Wafer curved needle connetor,but the pixel pitch(connector) just has 2mm. If you have any new idea,pls let us know freely.
READ MORE →We have the led wall washer be R G B version(12pcs R, 12pcs G, and 12pcs B), 36LEDs/m, DMX signal, it's made by Cree single color LED chip. but now our customer wants to use the R G B 3 in 1 LED chip with power of 36LEDs/m & 36W/m, without DMX or other IC chips, and We can use different lens angles,10 * 45°,25°, 45°,60°, etc
READ MORE →This custimized DMX led tube is based on our standard led tube: http://www.ipixelleds.com/index.php?id=142 We only changed the RGB led chip into RGBW for our Croatia. It is φ30mm DC12V 96leds/m with 16pixels. Welcome to share us your grear idea!
READ MORE →It is DC24V, 25W/pc, IP20. There are 4 installation holes on the PCB.
READ MORE →Pixel pitch : 13.8mm Voltage: DC24V Leds : 72LEDs PCB size: 1000mm*20mm PCB color: White pcb Holes: 12pcs holes with 4mm diameter IP rate: IP20 Connector: 5Pin JST
READ MORE →89pcs SK6812 RGB SMD5050 LED Right Angle Rigid bar. Pixel Pitch 9mm,PCB width: 11mm. PCB thickness:1.5mm, Black pcb. Please contact us for free if you have a great idea.
READ MORE →30pcs LEDs/m DC12V, 7.5W/M, Black PCB, Non-waterproof IP20, 3Pin JST connector Two version PCB board material for choose: PCB Size: 1000*10mm ( FR4 PCB board ) PCB Size: 1000*15mm ( Aluminum PCB board )
READ MORE →Internal code;51100048 We have standard DMX RGB meteor tubes, but our customers really want the white ones without IC chip, so we developed these two new monochrome ones
READ MORE →
Email: inquiry@ipixelleds.com
WhatsApp: 0086-138-0255-3087
Skype: ipixelled
Copyright © 2016 iPixel LED Light Co.,Ltd
版权所有:深圳市像素之光科技有限公司
备案号:粤ICP备16048450号 粤公网安备 44030602006908号