Internal Code：51300174 High density matrix with 81pcs SK6805-1515-RGB on a 36x51mm fiber PCB. There are four 3M hole in the corner. The lights performed very well, but pay attention to the heat dissipation when using it.
READ MORE →
Before we developed 120led SMD 4040 led strip, this one we just have white PCB, and doing waterproof with normal glue, this time one of US customer asked black PCB with black glue, we make it ！
READ MORE →
3535 high power Cree LED chip, each PCB has 12LEDs/pcs, 28W, DC24V. Each LED chip with a lens; Beam Angle:10x45 degree; PCB size :760*24*14mm; Mounting holes:4pcs*5mm diameter.
READ MORE →
Internal Code：51300169 Here information about the new panel : Part Number : M149045CA4SA1 IC type: SK6812 Pixel pitch : 20mm Voltage: DC5V Leds : 45leds PCB size: 149x205mm PCB color: Black pcb
READ MORE →
This led strip is customized by one of our Australia customers. Part Number : S012240DC3PZ Led chip : SMD 3535 RGB high Bracket led chip PCB width : 12mm length : 3m/roll Voltage : DC24V
READ MORE →
LED Quantity: 60LEDs/m Voltage: DC12V, LED color: White LED chip : SMD 2835 PCB width: 8mm Non-waterproof IP20, 2pin male/female connector The led strip has two positive terminal at one end and two negative terminal at the other Welcome to contact us If you have good new ideas.
READ MORE →
Internal code: 61100069 Customised rigid round pixel Matrix, SMD5050 RGBW (2800-3000K), 24pcs LED & 1pcs UCS2904 IC, White PCB(fiberglass board), DC24V, 7W/M, Diameter: 90mm, 3Pin JST SM connector If you have any idea,pls contact us freely.
READ MORE →
This product is customized by our German customers. 96leds/m DMX 512 Double Row led strip. Part Number:S020096CC3DC6 96pcs SMD5050 RGB LED,DC24V. 8 pixel per meter, 24 channel. Black PCB,PCB Size: 5000*20mm, Non-waterproof IP20.
READ MORE →
This is a new custom product from one of our client,they done 10led/pcs with Molex connectors (2.54 pixel pitch) before,but now they ask to do 12led per pcs. This one we use APA102 led chip,not SK9822,and the size is 435*14mm, there has 4pcs*5mm diameter holes for you to install that,both end with 2pcs*4pin Wafer curved needle connetor,but the pixel pitch(connector) just has 2mm. If you have any new idea,pls let us know freely.
READ MORE →
Internal code: 51300164 New customized led rigid round panel Part Number: M031006CC4PB8 DC24V DMX512 RGBW SMD5050 led rigd panel Diameter 31mm, 6LEDs White PCB with molex connector back side of the PCB
READ MORE →
This DMX led strip is DC24V,14.4W/m, 10Pixel 30Ch DMX512 Control, 60pcs SMD5050, 5meter/roll, DC24V, 14.4W/M, ,PCB width: 10mm This DMX led strip is different from the common DMX strip. You don’t need to use a address writer for write the address for the led strip before it connecting the controller. Just plug in the strip, and it can write the address by itself which will save your time and help your work easier.
READ MORE →
We have the led wall washer be R G B version(12pcs R, 12pcs G, and 12pcs B), 36LEDs/m, DMX signal, it's made by Cree single color LED chip. but now our customer wants to use the R G B 3 in 1 LED chip with power of 36LEDs/m & 36W/m, without DMX or other IC chips, and We can use different lens angles,10 * 45°,25°, 45°,60°, etc
READ MORE →
Email: inquiry@ipixelleds.com
WhatsApp: 0086-138-0255-3087
Skype: ipixelled
Copyright © 2016 iPixel LED Light Co.,Ltd
版权所有：深圳市像素之光科技有限公司
备案号：粤ICP备16048450号
粤公网安备 44030602006908号
