Calculate the total LED load and reserve approximately 20% capacity. For example, a 48W LED load normally requires a power supply rated at 60W or above.
LPV Series 20~150W
LPV Series 20~150W
Constant voltage design
Universal AC input / Full range
Withstand 300VAC surge input for 5 secondsProtections: Short circuit / Over load / Over voltageCooling by free air convectionSmall and compact size
Fully encapsulated with IP67 level (Note.7)Fully isolated plastic case
Class II power unit, no FG
Class 2 power unit
Pass LPS
Suitable for LED related fixture or appliance
(such as LED Decoration or Advertisement devices) (Note.11)
100% full load burn-in test
Low cost, high reliability
2 years warranty
Product Series Specification Matrix
FAQ
Yes. Multiple LED products can share one constant-voltage power supply if their voltage is the same and the combined load does not exceed the recommended capacity. A distribution box or customized wiring harness may be used.
Yes. We can provide regional input plugs, bare-wire input, DC connectors, locking connectors and customized cable assemblies according to the equipment design.
Not necessarily. Certification, input cable, plug, housing and rated output may differ by model. The required market and certification should be confirmed before selection.