Calculate the total LED load and reserve approximately 20% capacity. For example, a 48W LED load normally requires a power supply rated at 60W or above.
ELG Series 100~240W
ELG Series 100~240W
Constant Voltage + Constant Current mode output
Metal housing design with functional Ground
Built-in active PFC function
No load /Standby power consumption <0.5W
IP67 /IP65 rating for indoor or outdoor installations
Function options: output adjustable via potentiometer;
3 in 1 dimming (dim-to-off); Smart timer dimming; DALI
Typical lifetime>50000 hours
5 years warranty
FAQ
Yes. Multiple LED products can share one constant-voltage power supply if their voltage is the same and the combined load does not exceed the recommended capacity. A distribution box or customized wiring harness may be used.
Yes. We can provide regional input plugs, bare-wire input, DC connectors, locking connectors and customized cable assemblies according to the equipment design.
Not necessarily. Certification, input cable, plug, housing and rated output may differ by model. The required market and certification should be confirmed before selection.